|
|
|
Lane Machine Programs
|
|
Originally Posted By: 8270kingI do not have any gunk.....I shake the machine LOL, I don't doubt this for a moment.
|
|
Brunswick GS Pinsetters
|
|
have you tried tightening the spotting tong drive? or even get some over sized dampers. one of our mechanics actually made his own version of a damper. take two dampers and duck tape one damper sideways to the other one, but use 3 small strips beca
|
|
Pinspotters AMF
|
|
we order from western pacific and Complete bowling supply. would anyone have the part numbers, so I can look up the price?
|
|
Brunswick GS Pinsetters
|
|
make sure the retaining pins that hold the ejector flap are in good shape....
|
|
Qubica Scoring Systems Discussion
|
|
yes, i have it a little more time consuming but much better than nothing, thank to all very helpful.
|
|
Lane Conditioning & Cleaning Machines Maintenance
|
|
You may want to talk to a doctor if you get symptoms while using less. If the stuff just irritates you you have probably done enough just by reducing your exposure. If you are developing an allergy to one of the ingredients a chat with a doctor may b
|
|
Lane Conditioning & Cleaning Machines Maintenance
|
|
Originally Posted By: HBOwnerOriginally Posted By: Marty MurphyI cant say I have ever heard of that. Give Kegel a call and see what they say. Marty - Pro Bowl West I agree, call Brandi about this. Tim I havent either. Will are you using it straig
|
|
Pinspotters AMF
|
|
I adjust mine to be as tight as possible, while still allowing smooth cup motion when setting an empty deck. I start by tightening 1/4" past what the book says of in line with the slot. Then I start testing by running empty deck and watch cups
|
|
Lane Machine Programs
|
|
Originally Posted By: HBOwnerTriac, what conditioner are you using? Tim I would get in hot water if I told. Reveling our secrets would take our edge away from our local competition.
|
|
Brunswick Scoring Systems Discussion
|
|
Not sure if this goes here.Bulbs are good, checked connection at switch and switch itself. Everything good . But still no lights,any sug...
|
|
Pinspotters AMF
|
|
The "book adjustment is to have the spring end inline with slot where the cup and the cup cap meet for a starting point and if the cups are jerky or the pins wiggle weaken as necessary.
|
|
Lane Machine Programs
|
|
I do not have any gunk.....I shake the machine
|
|
Pinspotters AMF
|
|
The 3 yoke springs that sit on shafts 3 and 4 for cup return could you please tell me the adjustment and how it is achieved. I have fitted some after yoke replacements in the past but never known correct positioning! Many Thanks, Paul
|
|
Qubica Scoring Systems Discussion
|
|
I am not sure about your version, we started with version 2, but try this. Have the manager log into general manager mode and Select the question mark with the arrow then select the lane. This should give you an exact number of frames bowled on that
|
|
Lane Machine Programs
|
|
Triac, what conditioner are you using? Tim
|
|
Lane Machine Programs
|
|
I think Jerry said a starting point for the reverse buff is three feet before your first applied load on the return. The nice thing about the RBD is you can start it longer or shorter to assist in adjusting your pattern instead of adding/removing a
|
|
Lane Conditioning & Cleaning Machines Maintenance
|
|
Originally Posted By: Marty MurphyI cant say I have ever heard of that. Give Kegel a call and see what they say. Marty - Pro Bowl West I agree, call Brandi about this. Tim
|
|
Brunswick Scoring Systems Discussion
|
|
I've discovered that I can clear scores from the desk. So what I can do: Clear scores, change modes,send message to the scorer, change the date and time on the desk monitor. What I can't do: Clear errors, receive data from the scorer.
|
|
Pinspotters AMF
|
|
i know changing the spot/respot cam is a pain but if all else fail then that has to be done. i have a distributor here that has a lot of washer and shims when i took over, after removing them i found out why, now have to rebuilt the entire distribut
|
|
Pinspotters AMF
|
|
Originally Posted By: ringing7 taking the easy way out by cutting or grinding down the rod is the easy way out but the orginal problem on why you cant get the adjustment is still there. its just going to bite you in the butt later I agree that if
|
|
Brunswick GS Pinsetters
|
|
I am having problems with lane 9 not wanting to pick up all the pins every time after the first ball is thrown. It is so sparadic also in doing it. The table will come down to grab what is left, and it does not always grab every pin that is standin
|
|
Pinsetters Brunswick
|
|
tell me about it. so much jerry rigging, mismatched bolts. it's very annoying. so far im doing quite well in keeping everything matching! nothing worse when going to take something apart that you KNOW is 7/16, but when you get to it it's 1/2 *HAT
|
|
Lane Machine Programs
|
|
I totally understand, Drill. Most people switch oils because of performance or quality control issues. I have tried many conditioners in the past that didn’t show any sign of gunking up…but they didn’t perform very well on our lanes. It seems t
|
|
Other Pinsetting Equipment
|
|
Looks like Candle Lanes in Pittsfield MA
|
|
Pinspotters AMF
|
|
Really good Idea. Did the machine shop add an extension to an existing shaft or was it machined from scratch? If the extension was added on, is it a bolt on? I’m sure others would like to see some more detailed pictures.
|
